Results 1 to 3 of 3

Thread: [VR] Intake/Header/Pulley 6th Gen ZL1 makes 692rwhp!!!

  1. #1

    [VR] Intake/Header/Pulley 6th Gen ZL1 makes 692rwhp!!!






    It seemed like ZL1 month here at Vengeance Racing. With the reputation of this amazing and capable Camaro we have had many customers looking to modify their 6th Gen ZL1’s. Warren recently has his beautiful white ZL1 transported to us using our transporter TMP Transportations. Chris had already installed a Cold Air intake on his ZL1 and was looking to wake the LT4 up further. For his build we went with the following:



    • Kooks 1 7/8” Longtube Header System w GREEN catted Conn Pipe
    • Vengeance Racing High Temp Spark Plug wire isolators
    • ATI Balancer Kit for LT4
    • Lingenfelter 9.17” 18% Pulley
    • Vengeance Racing Flex Fuel Sensor Kit
    • 180* Thermostat






    Chris wanted a louder tone out of his exhaust so we decided to run KOOKS 1 7/8” Headers with a “GREEN” Catted Connection pipe. With this we added our Vengeance Racing high temp spark plug wire insulators to protect his plug wires from the added heat. From there we added ATI’s Balancer kit for the wet sump LT4 along with Lingenfelter’s 18% 9.17” Pulley.








    Chris was looking to run both pump gas and E85 so we added our Vengeance Racing Flex Fuel Sensor Kit. Now the stock fuel system will not allow you to run 100% E85 and Chris did not want to upgrade the fuel system yet so we opted for a 50/50 mix to satisfy his performance goals. With the car buttoned up it was once again time to head over to our chassis dyno for some numbers. On pump gas Chris’ ZL1 made 646rwhp and 719rwtq. On 50% E85 the ZL1 made 692rwhp and 750rwtq. These were excellent results for these few modifications and Chris was blown away by the night and day difference in the cars performance.








    Check out more of our Feature Builds, Performance Packages and Products at our website https://vengeanceracing.net/index.html. We have a wide range of performance parts on our online store for your LS or LT build. Feel free to contact us with any questions at Sales@VengeanceRacing.net or by phone @ 678-513-7105. We look forward to hearing from you.


    And as always be sure to Like, Follow and Subscribe to Vengeance Racing on Social Media.
    FaceBook @ Vengeance Racing
    Instagram @ Vengeance Racing
    YouTube @ Ronatvengeance


    VENGEANCE RACING
    LSX Performance Professionals
    Shop online at
    www.VengeanceRacing.net
    or call
    678-513-7105
    FaceBook Page | YouTube Channel
    Watch Vengeance Racing In Action

  2. #2





    It seemed like ZL1 month here at Vengeance Racing. With the reputation of this amazing and capable Camaro we have had many customers looking to modify their 6th Gen ZL1’s. Chris recently had his beautiful white ZL1 transported to us using our transporter TMP Transportations. Chris had already installed a Cold Air intake on his ZL1 and was looking to wake the LT4 up further. For his build we went with the following:



    • Kooks 1 7/8” Longtube Header System w GREEN catted Conn Pipe
    • Vengeance Racing High Temp Spark Plug wire isolators
    • ATI Balancer Kit for LT4
    • Lingenfelter 9.17” 18% Pulley
    • Vengeance Racing Flex Fuel Sensor Kit
    • 180* Thermostat






    Chris wanted a louder tone out of his exhaust so we decided to run KOOKS 1 7/8” Headers with a “GREEN” Catted Connection pipe. With this we added our Vengeance Racing high temp spark plug wire insulators to protect his plug wires from the added heat. From there we added ATI’s Balancer kit for the wet sump LT4 along with Lingenfelter’s 18% 9.17” Pulley.








    Chris was looking to run both pump gas and E85 so we added our Vengeance Racing Flex Fuel Sensor Kit. Now the stock fuel system will not allow you to run 100% E85 and Chris did not want to upgrade the fuel system yet so we opted for a 50/50 mix to satisfy his performance goals. With the car buttoned up it was once again time to head over to our chassis dyno for some numbers. On pump gas Chris’ ZL1 made 646rwhp and 719rwtq. On 50% E85 the ZL1 made 692rwhp and 750rwtq. These were excellent results for these few modifications and Chris was blown away by the night and day difference in the cars performance.








    Check out more of our Feature Builds, Performance Packages and Products at our website https://vengeanceracing.net/index.html. We have a wide range of performance parts on our online store for your LS or LT build. Feel free to contact us with any questions at Sales@VengeanceRacing.net or by phone @ 678-513-7105. We look forward to hearing from you.


    And as always be sure to Like, Follow and Subscribe to Vengeance Racing on Social Media.
    FaceBook @ Vengeance Racing
    Instagram @ Vengeance Racing
    YouTube @ Ronatvengeance


    VENGEANCE RACING
    LSX Performance Professionals
    Shop online at
    www.VengeanceRacing.net
    or call
    678-513-7105
    FaceBook Page | YouTube Channel
    Watch Vengeance Racing In Action

  3. #3





    It seemed like ZL1 month here at Vengeance Racing. With the reputation of this amazing and capable Camaro we have had many customers looking to modify their 6th Gen ZL1’s. Chris recently had his beautiful white ZL1 transported to us using our transporter TMP Transportations. Chris had already installed a Cold Air intake on his ZL1 and was looking to wake the LT4 up further. For his build we went with the following:



    • Kooks 1 7/8” Longtube Header System w GREEN catted Conn Pipe
    • Vengeance Racing High Temp Spark Plug wire isolators
    • ATI Balancer Kit for LT4
    • Lingenfelter 9.17” 18% Pulley
    • Vengeance Racing Flex Fuel Sensor Kit
    • 180* Thermostat






    Chris wanted a louder tone out of his exhaust so we decided to run KOOKS 1 7/8” Headers with a “GREEN” Catted Connection pipe. With this we added our Vengeance Racing high temp spark plug wire insulators to protect his plug wires from the added heat. From there we added ATI’s Balancer kit for the wet sump LT4 along with Lingenfelter’s 18% 9.17” Pulley.








    Chris was looking to run both pump gas and E85 so we added our Vengeance Racing Flex Fuel Sensor Kit. Now the stock fuel system will not allow you to run 100% E85 and Chris did not want to upgrade the fuel system yet so we opted for a 50/50 mix to satisfy his performance goals. With the car buttoned up it was once again time to head over to our chassis dyno for some numbers. On pump gas Chris’ ZL1 made 646rwhp and 719rwtq. On 50% E85 the ZL1 made 692rwhp and 750rwtq. These were excellent results for these few modifications and Chris was blown away by the night and day difference in the cars performance.








    Check out more of our Feature Builds, Performance Packages and Products at our website https://vengeanceracing.net/index.html. We have a wide range of performance parts on our online store for your LS or LT build. Feel free to contact us with any questions at Sales@VengeanceRacing.net or by phone @ 678-513-7105. We look forward to hearing from you.


    And as always be sure to Like, Follow and Subscribe to Vengeance Racing on Social Media.
    FaceBook @ Vengeance Racing
    Instagram @ Vengeance Racing
    YouTube @ Ronatvengeance


    VENGEANCE RACING
    LSX Performance Professionals
    Shop online at
    www.VengeanceRacing.net
    or call
    678-513-7105
    FaceBook Page | YouTube Channel
    Watch Vengeance Racing In Action

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •